These aren't ordinary pedals. The P1 pedal is a simple, intelligent and uncompromising design that provides the same proven PowerTap accuracy and reliability. The simple one-piece design easily mounts to any crank and does not require calibration nor installation angle setting, providing a true “plug-and-play” experience. The P1 also features dual band ANT+ and Bluetooth SMART for compatibility with a multitude of head units and smart devices. Plus, the independent measurement opens the possibility for a new set of pedaling metrics previously unavailable to help give you the ultimate competitive edge.
Built to be just as robust and just as precise as its world-renowned sibling, the PowerTap Single-Sided Pedal has all the innovation of the P1 pedals – at a fraction of the price. Named for its single-sided nature, the PowerTap Single-Sided Pedal doubles the watts produced by the left pedal to calculate total power. The PowerTap Single-Sided Pedal also touts the same plug-and-play installation, easy-to-swap, cross-bike compatibility, along with dual-band ANT+ and Bluetooth as its bi-lateral counterpart. Ideal for the bike enthusiast, the weekend warrior or the power-training curious, there is no better way to get started with accurate pedal-based power than the PowerTap Single-Sided Pedal. - Weight: 390 grams per pair of pedals (without batteries) - Thread Type: 9/16" - Cleat Interface: 3 bolt - Cleat: Red, 6 degree floating - Spring Type: Adjustable Elastomer - Proven PowerTap accuracy - Release Tension: 6-20 Nm - Stack Height: 14mm - Center of Pedal: 53mm (measured from crank to pedal) - Lean Angle: 25.5 degrees (based on 175mm crank length, 75mm BB drop and 147mm Q-Factor crank) - Firmware Updates: Over the air - Connectivity: ANT+ and Bluetooth SMART - Battery: AAA Lithium (alkaline and/or rechargeable alkaline batteries not recommended for extended use) - Battery Life: 60 hours - No weight limit - PowerTap Single-Sided Pedals are not capable of providing advanced pedal metric data. In order to display advanced pedal metric data you must be using dual-sided P1 pedals.
Speedplay's X/1 Titanium pedals are super-light and a great upgrade for your dream road bike. They provide knee-saving unlimited float without the self-centering action inherent in most pedals, so your knees don't have to work against spring tension. They also boast needle and dual cartridge bearings for smooth spinning, while their dual-sided design offers extremely easy entry and exit. A compact, low profile positions your feet closer to the axles for maximum power transmission and unmatched cornering clearance.
$212.49 - $249.99 $249.99 Up To 15% Savings
The Blade Carbon is a product of lengthy research by LOOK engineers to optimize all the innovative concepts developed within the family of Blade pedals. The result is a pedal that is secure, stable, light, and powerful. Its design fully integrates the blade for unsurpassed aerodynamics. Fitted with a carbon body and blade, the Blade Carbon Chromoly features a chromoly axle that creates a pedal weighing only 110g and comes in three release tensions: 12, 16, and 20 Nm. Includes grey Kéo cleats + screws.
$214.00 - $224.00
Speedplay's Zero Stainless are superb pedals for road cycling thanks to their light weight, cornering clearance, adjustability and easy entry and exit. This means you'll be the first going out of stop signs and start lines and be able to dive into the deepest corners. The Zeros let you choose a fixed cleat position or up to 15-degrees of unimpeded float, and independently adjust the lateral and fore/aft positioning. Plus, these pedals are exceptionally light, making them a great choice for your prized road rocket. They boast needle and cartridge bearings for smooth rotation and a cleat-based engagement mechanism that ensures you won’t clip out when going hard. - Fits all standard 3-Hole and 4-Hole shoes - Thin, contoured cleat profile makes walking easier and more fluid
$194.99 - $209.99
Speedplay's Zero Stainless are superb pedals for road cycling thanks to their light weight, cornering clearance, adjustability and easy entry and exit. This means you'll be the first going out of stop signs and start lines and be able to dive into the deepest corners. The Zeros let you choose a fixed cleat position or up to 15-degrees of unimpeded float, and independently adjust the lateral and fore/aft positioning. Plus, these pedals are exceptionally light, making them a great choice for your prized road rocket. They boast needle and cartridge bearings for smooth rotation and a cleat-based engagement mechanism that ensures you won’t clip out when going hard.
$203.99 $239.99 15% Savings
BikeSmart's ZigZag SL Pedals offer pro-level clipless-pedal performance at a feathery weight thanks to their magnesium bodies and titanium axles. You get dual-sided entry, smooth and long-lasting sealed bearings, adjustable release tension and an open design for mud shedding so that you can always get in and out of your pedals regardless of the trail conditions. Plus, at a mere 240 grams, these beauties are lighter than most of the competition, too!
$93.46 - $199.99 $199.99 Up To 53% Savings
The company that pioneered clipless pedal technology broke the mold when they developed the Keo 2 Max Blade pedals. They feature lightweight composite bodies and wide, platforms for excellent support, comfort, and pedaling efficiency. Carbon leaf springs provide quick, positive entry and exit while smoothing airflow over the bottom of the pedal. This unique platform results in a stable pedaling surface and an ultra-secure connection while you're riding. The Keo 2 Max Blade pedals feature chromoly axles, sealed bearings, and stainless-steel contact plates.
$140.24 - $199.99 $164.99 - $199.99 Up To 15% Savings
Syzr Pedal Systems transfer power more efficiently to your off-road rig. Rider power is delivered to Syzr pedals directly through the cleats, not through the spongy rubber lugs of the shoe sole. Direct, Through-the-Cleat Power Transfer ensures that no rider energy is lost during transmission. SYZR pedals also use Active Cleat Stabilization Technology to improve the precision of the pedal/cleat connection and eliminate the slop and lateral instability common to off-road pedals. With advanced Roller-Cam Release Technology, Speedplay ensures consistent release in wet or muddy conditions. Instead of the usual metal-to-metal connection that allows other pedals and cleats to seize during release, Syzr cleats feature Ceramic Roller-Cams that do not seize when wet because they roll. In addition to improving consistency of release, the ceramic contacts provide exceptional, long-term durability.
Speedplay's X/2 pedals provide knee-saving unlimited float without the self-centering action inherent in most pedals, so your knees don't have to work against spring tension. They also boast a stainless steel spindle, needle and dual cartridge bearings for smooth spinning, and a dual-sided design for extremely easy entry and exit. A compact, low profile positions your feet closer to the axles for maximum power transmission and unmatched cornering clearance.
$152.99 - $179.99 $179.99 Up To 15% Savings
Specialized's Boomslang Platform Pedals are insanely thin, yet still wickedly strong. A tapered outside pedal edge provides maximum grip and ground clearance, while the super low-profile design—a mere 10mm at the center—is like a direct telepathic line from your body to the bike. Custom undercut pins provide incredible traction and are simple to remove, and should one break during your ride, each pedal carries four hidden pins for easy replacement. • Super slick, patent pending, spindle design • Super low-profile design; 10mm thickness at center • Custom undercut pins provide “clip in” style grip and easy removal • Pedal body carriers 4 hidden pins for easy replacement of broken pins • Tapered outside pedal edge for maximum grip and ground clearance • Large foot platform for modern day DH, 110x108mm
$140.24 - $164.99 $164.99 Up To 15% Savings
For enduro riding and racing, it's all about the Crank Brothers Mallet E pedals. Winner of a Design & Innovation Award for 2016, this pedal features a concave platform for a secure, grippy foothold, and six adjustable pins per side for even more security. The adjustable traction pad interface keeps you in contact with the pedal so you can focus on your line. Four-sided entry ensures your foot will catch quickly and easily, as well as helping the Mallet E shed mud like no other. A 52mm q-factor is your best friend on tight trails, because who wants to be clotheslined by a tree? Not you, that's for sure. Throw in chamfered edges to ward off rock strikes, and a customizable float and release system and you're ready to shred. Specifications: - spindle material: forged scm 435 chromoly steel - body material: 6061-T6 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - adjustable pins: 6 per side for grip - endcap: hex alloy - cleat: premium brass cleats with shims included - weight: 419g per pair
$129.99 - $154.00
Speedplay's Zero Chromolys are fantastic pedals for road cycling thanks to their low weight, cornering clearance, adjustability and easy dual-sided entry and exit. This means you'll be the first going out of stop signs and start lines and be able to dive into the deepest corners. The Zeros let you choose a fixed cleat position or up to 15-degrees of unimpeded float, or independently adjust the lateral and fore/aft positioning. They boast needle and cartridge bearings and a cleat-based engagement mechanism that ensures you won’t clip out when going hard. - Dual sized, self-locating entry is easy and precise, every time - Large, stable pedaling platform - Fits any shoe with a 3 or 4-hole mount
$135.99 $159.99 15% Savings
Look brings their decades of clipless pedal experience to mountain bikers with their S-Track Race pedals. These easy entry/exit pedals boast a lightweight, minimalist design. Plus, for a great feel, maximum pedaling efficiency and excellent control, they have large surface areas complemented by the included cleats that spread pressure over more of your shoe, and improve overall comfort, too. They also have an open design that sheds even the worst mud with ease and ensures that the entry/exit is always crisp, solid and secure. Plus, with their 15-degree release angle, it's easy to get out in a hurry. The S-Tracks have carbon bodies, sealed bearing and chromoly axles for excellent durability.
$127.49 $149.99 15% Savings
BikeSmart's Sprinter SL Pedals are a pro-level road clipless pedal system with advanced features. They boast lightweight and durable composite bodies, tough chromoly axles and smooth and long-lasting sealed bearings. There are also "wings" on the platforms for more cleat-to-pedal contact, which adds comfort and boosts power. The SLs come with Look Keo-compatible cleats for easy entry/exit.
$127.46 $199.99 36% Savings
Power transfer begins at the pedals, and Shimano's Ultegra Pedals boast Pro Tour-proven tech to make the most of your riding. Composite bodies are light and extra wide, maximizing your efficiency and reducing power-stealing flex. Stainless steel tread plates improve pedal body durability for miles of faithful service. Additionally, adjustable entry and release tension lets you customize pedal performance to suit your riding style.
$106.24 - $124.99 $124.99 Up To 15% Savings
From the company that pioneered clipless pedal technology come the Tour de France-winning Keo 2 Max pedals. They feature lightweight composite bodies and wide platforms for excellent support, comfort and pedaling efficiency. Complementing the great feel is Look's low-profile design that places you closer to the axles for even more pedal power and a lower center of gravity for better cornering. There's also built-in float allowing your feet to self-adjust to the optimum position while you pedal, which protects your knees. Plus for smooth running and durability there are chromoly axles, three sets of sealed bearings plus stainless-steel contact plates. You also get adjustable release tension.
$79.95 - $119.99 $119.99 Up To 33% Savings
Crank Brothers' Eggbeater pedals are 4-sided, making them super easy to enter and exit. Their open design sheds mud and debris quickly, and these pedals feature 6-degrees of knee-friendly float. The Eggbeater 3s boast forged chromoly axles, stainless-steel springs, cast steel bodies and wings, and inner needle bearings. The bearing internals are watertight for longevity and consistently smooth pedaling.
$101.99 - $119.99 $119.99 Up To 15% Savings
• Thin platform, concave aluminum body with bottom loading pins. • Shorter spindle design shaves weight. • Thin concave platform • Reduced spindle length saves weight • Hex-head threaded pin design offers more bite for added security • Hidden / Grease access port for extended life • Platform size: 101x100cm • Cartridge bearings and DU bushings • 20 SHCS hex traction pins per pedal
Speedplay's X/5 pedals are lightweight and feature-packed at a great price. They provide knee-saving unlimited float without the self-centering action inherent in most pedals, so your knees don't have to work against spring tension. They also boast needle and dual cartridge bearings for smooth spinning and a compact, low profile positions your feet closer to the axles for maximum power transmission and unmatched cornering clearance. The dual-sided design of the X/5 pedals offers extremely easy entry, and an early release angle makes exiting effortless.
$114.71 $179.99 36% Savings
• Wide pedal-to-shoe contact area • Wider bearing placement for increased rigidity • Slimmer, lighter axle • Low platform height for pedaling stability • Lightweight: 310g pair • Oval shape axle body housing for smoother mud & debris flow • Slimmer axle unit increases open space between bindings • Robust, dependable retention claws provide smooth engagement/release • Adjustable entry and release tension settings • Strong , durable chrome-moly spindle with 8mm hex wrench mount
$101.99 $119.99 15% Savings
Crank Brothers' Candy pedals combine 4-sided cages for super-easy entry/exit with CNC'd aluminum platforms for top-notch support and impact durability. The Candy 3s feature chromoly axles, extra secure springs, cast steel wings and an open design to quickly shed mud, making them ideal for sloppy conditions and cyclocross. They're also enhanced with inner needle bearings and water-tight internals for consistently smooth pedal revolutions.
$95.16 $149.99 37% Savings
With Shimano's 105 SPD-SL Pedals, you get pro-level features without the price tag. They sport extra-wide platforms with stainless-steel plates for easy and smooth entry and exit, and excellent pedaling efficiency. Inside, there are sealed cartridge bearings for minimal friction and long-term durability. Plus, these fine pedals also feature adjustable entry and release tension so that you can dial them in for the perfect feel.
$89.95 $149.99 40% Savings
From the company that pioneered clipless pedal technology come the Tour de France-winning Keo 2 Max Carbon pedals. They feature carbon bodies with stainless-steel platforms for low weight, easy entry and exit and exceptional durability. The wide contact area and the low-profile design place you closer to the pedal axles for optimum stability, maximum power transfer and a lower center of gravity that helps your cornering. These pro-level pedals have customizable release tension as well.
$84.99 $99.99 15% Savings
BikeSmart's Sprinter Pedals are a fine road clipless pedal system with excellent features at an affordable price. They boast lightweight and durable magnesium bodies, tough chromoly axles and smooth and long-lasting sealed bearings. You also get Look Keo-compatible cleats for easy entry/exit.
$50.80 - $84.99 $99.99 Up To 15% Savings
Look’s easy-to-use Keo Classic 2 pedals feature lightweight composite bodies and wide platforms for excellent support, comfort, and pedaling efficiency. Their bi-material body creates a light, rigid pedal with an integrated support surface for excellent stability and low weight. The Keo Classic 2 pedals also feature steel axles, sealed bearings, and adjustable release tension.
$68.00 - $80.00 $80.00 Up To 15% Savings
With loads of traction, sure-footedness, and premium control, Specialized's Bennies Platform Pedals are ready for everything from freeride madness to trail riding. They're made of a rugged, yet lightweight concave aluminum body with 24 replaceable pins for maximum grip. Durable chromoly axles and sealed cartridge bearings mean they're built to last.
$67.99 - $79.99 $79.99 Up To 15% Savings
The Keo Classic 3's large and wide contact surface provides excellent pedaling stability for comfortable and efficient riding. It's built with oversize chromoly axles and cartridge bearings for maximum durability and easy maintenance. - Composite body - 9/16" axle - 15.7mm stack height - Adjustable float - Grey Keo Grip cleats and screws included - 140g per pedal
$76.46 $119.99 36% Savings
• 7.7% more pedal-to-shoe contact vs. PD-M780 • 2.8mm wider pedal platform vs. PD-M780 • Mud shedding offset binding design • 0.5mm lower platform height than PD-M780 for pedaling stability • Robust retention claws provide smooth engagement/release • Adjustable entry and release tension settings • Strong, durable chrome-molly spindle with 8mm hex wrench mount
$76.46 $119.99 36% Savings
• 11.7% more pedal-to-shoe contact vs. PD-M785 • 3.3mm wider pedal platform vs. PD-M785 • 0.5mm lower platform height than PD-M785 for pedaling stability • Integrated cage increases stability and control when not clipped in and protects binding mechanism against impacts • Robust retention claws provide smooth engagement/release • Adjustable entry and release tension settings • Strong, durable chrome-moly spindle with 8mm hex wrench mount
Page 1 of 2 Next page